FAQs

What is bond breaker tape?

Bond breaker tape is a polyethylene film tape used to prevent three point adhesion in joints to shallow for a backer rod.

Can polyurethane sealant be painted?

Yes, polyurethane sealant are typically paintable. You should always check with the sealant manufactures specification to verify on painting instructions.

Note that while Polyurethane and Latex sealant are paintable, if any joint movement takes place the paint will split, creating an unsightly sealant joint. Sealant Engineering recommends the use a sealant color to match the desired color

Can silicone sealant be painted?

Silicone sealant can not be painted with common acrylic, latex and oil  paints. Silicone sealant can be painted with the silicone based paint “Dowsil AllGuard”, please call for more information regarding Dowsil AllGuard silicone paint.

What temperature can sealant be applied at?

Silicone can be applied typically down to -20 F, Polyurethane and Acrylic Latex can typically be applied down to 34F.

Note that Polyurethane and Acrylic Latex will thicken the colder the sealant is, use of a high ratio caulk gun is recommended. Albion B26 is recommended.

What is the difference between bulk, sausages and cartridges?

Bulk is sealant pulled from pails, recommended for commercial production caulking

Sausages are 20 oz sausage packages, recommended for commercial and residential contractors. Typically more cost effective then cartridges and cleaner and easier to use then bulk. There is also less waste and less clean up.

Cartridges are 10-11 oz cartridges, recommended for all.

What sealant should I use in my bathroom?

For bathrooms and kitchens we recommend using an acetoxy silicone with anti fungal agent, such as Dowsil Tub Tile Ceramic or Dow Corning 786.

I have a different question

We’re happy to help! Send us an email  call 630-860-7878 or use our contact form if you have any questions or concerns about products we carry.