Backer Rod

Sealant Engineering is a full stocking distributor of  Denver Foam, Titan Foam Soft Cell , Mile High Closed Cell Backer Rod. Stocking sizes from 1/4" up to 4".

Sealant Engineering the creator and national distributor of SEA Foam for well joints not deep enough for a backer rod  and to deep for a bond breaker tape.

*Due to weight of backer rod and size of packaging our cart may not correctly figure the shipping charges. You maybe contacted to discuss additional shipping prior to order release.


Titan Foam Soft Type Backer Rod - 3/8", 3600 ft. per box
  • Titan Foam Soft Type Backer Rod is a soft, pliable and non-gassing backup material that is inserted into a joint to control sealant depth. This creates a backstop to facilitate proper sealant tooling, yielding a quality bond breaker between the backup material and the sealant. Titan Foam Soft Type Backer Rod can also be used as a temporary joint seal.Closed cell backer rod, but easier to install and more forgiving on varible sized joints.
  • 3/8" Diameter
  • Gray Color
  • 3600' per box

$117.65


Titan Foam Soft Type Backer Rod - 5/8" 1550ft. per box

 

 

  • Titan Foam Soft Type Backer Rod is a soft, pliable and non-gassing backup material that is inserted into a joint to control sealant depth. This creates a backstop to facilitate proper sealant tooling, yielding a quality bond breaker between the backup material and the sealant.
  • 5/8" Diameter
  • Gray Color
  • 1550' per box

$78.94


Titan Foam Soft Type Backer Rod - 7/8" - 850 ft. per box

 

 

  • Titan Foam Soft Type Backer Rod  is a soft, pliable and non-gassing backup material that is inserted into a joint to control sealant depth. This creates a backstop to facilitate proper sealant tooling, yielding a quality bond breaker between the backup material and the sealant.
  • 7/8" Diameter
  • Gray Color
  • 850' per box

$77.31


Titan Foam Soft Type Backer Rod - 1-1/8", 500 ft. per box

 

  • Titan Foam is a soft, pliable and non-gassing backup material that is inserted into a joint to control sealant depth. This creates a backstop to facilitate proper sealant tooling, yielding a quality bond breaker between the backup material and the sealant.
  • 1-1/8" Diameter
  • Gray Color
  • 500' per box

$70.63


Titan Foam Soft Type Backer Rod - 1-1/2", 420 ft. per box (6' sticks)

 

  • Titan Foam Soft Type Backer Rod  is a soft, pliable and non-gassing backup material that is inserted into a joint to control sealant depth. This creates a backstop to facilitate proper sealant tooling, yielding a quality bond breaker between the backup material and the sealant.
  • 1-1/2"" Diameter
  • Gray Color
  • 396' per box

 

$100.93


Titan Foam Soft Type Backer Rod - 2", 252 ft. per box (6' sticks)

 

  • Titan Foam Backer Rod is a soft, pliable and non-gassing backup material that is inserted into a joint to control sealant depth. This creates a backstop to facilitate proper sealant tooling, yielding a quality bond breaker between the backup material and the sealant.
  • 2" Diameter
  • Gray Color
  • 228' per box

 

$102.46


Titan Foam Soft Type Backer Rod - 3", 102 ft. per box (6' sticks)

 

  • Titan Foam Backer Rod is a soft, pliable and non-gassing backup material that is inserted into a joint to control sealant depth. This creates a backstop to facilitate proper sealant tooling, yielding a quality bond breaker between the backup material and the sealant.
  • 3" Diameter
  • Gray Color
  • 102' per box

 

$113.92


Titan Foam Soft Type Backer Rod - 4", 48 ft. per box (6' sticks)

 

  • Titan Foam Backer Rod is a soft, pliable and non-gassing backup material that is inserted into a joint to control sealant depth. This creates a backstop to facilitate proper sealant tooling, yielding a quality bond breaker between the backup material and the sealant.
  • 4" Diameter
  • Gray Color
  • 48' per box

 

$114.24


Titan Foam Soft Type Backer Rod- Per Foot (3/8", 5/8" or 7/8")

 

·  Titan Soft Type Backer Rod is a soft, pliable and non-gassing backup material that is inserted into a joint to control sealant depth. This creates a backstop to facilitate proper sealant tooling, yielding a quality bond breaker between the backup material and the sealant.

·  3/8", 5/8" or 7/8" Diameter

·  Gray Color

$0.25


Mile High Closed Cell Backer Rod- 1/4", 6400 ft. per box

 

  • Basic Use: Mile High Closed Cell Backer Rod is an ideal compressible and non-absorbent backup material that is inserted into a joint to control sealant depth. This creates a backstop to facilitate accurate sealant tooling and proper sealant wetting of the joint surfaces, yielding a quality bond breaker between the backup material and the sealant. Mile High Closed Cell Backer Rod can also be used as a temporary joint seal.
  • 1/4" Diameter
  • Black Color
  • 6400' per box

$101.62


Mile High Closed Cell Backer Rod - 3/8", 3600 ft. per box

 

  • Basic Use: Mile High Closed Cell Backer Rod is an ideal compressible and non-absorbent backup material that is inserted into a joint to control sealant depth. This creates a backstop to facilitate accurate sealant tooling and proper sealant wetting of the joint surfaces, yielding a quality bond breaker between the backup material and the sealant. Mile High Closed Cell Backer Rod can also be used as a temporary joint seal.
  • 3/8" Diameter
  • Black Color
  • 3600' per box

$80.25


Mile High Closed Cell Backer Rod - 1/2", 2500 ft. per roll

 

  • Basic Use: Mile High Closed Cell Backer Rod is an ideal compressible and non-absorbent backup material that is inserted into a joint to control sealant depth. This creates a backstop to facilitate accurate sealant tooling and proper sealant wetting of the joint surfaces, yielding a quality bond breaker between the backup material and the sealant. Mile High Closed Cell Backer Rod can also be used as a temporary joint seal.
  • 1/2" Diameter
  • Black Color
  • 2500' per box

$79.62


Mile High Closed Cell Backer Rod - 5/8", 1550 ft. per box

 

  • Basic Use: Mile High Closed Cell  Backer Rod is an ideal compressible and non-absorbent backup material that is inserted into a joint to control sealant depth. This creates a backstop to facilitate accurate sealant tooling and proper sealant wetting of the joint surfaces, yielding a quality bond breaker between the backup material and the sealant. Mile High Closed Cell Backer Rod can also be used as a temporary joint seal.
  • 5/8" Diameter
  • Black Color
  • 1550' per box

$72.48


Mile High Closed Cell Backer Rod - 3/4", 1100 ft. per box

 

  • Basic Use:Mile High Closed Cell Backer Rod is an ideal compressible and non-absorbent backup material that is inserted into a joint to control sealant depth. This creates a backstop to facilitate accurate sealant tooling and proper sealant wetting of the joint surfaces, yielding a quality bond breaker between the backup material and the sealant. Mile High Closed Cell Backer Rod can also be used as a temporary joint seal.
  • 3/4" Diameter
  • Black Color
  • 4000' per box

$69.42


Mile High Closed Cell Backer Rod - 1", 550 ft. per box

 

  • Basic Use: Mile High Closed Cell Backer Rod is an ideal compressible and non-absorbent backup material that is inserted into a joint to control sealant depth. This creates a backstop to facilitate accurate sealant tooling and proper sealant wetting of the joint surfaces, yielding a quality bond breaker between the backup material and the sealant. Mile High Closed Cell Backer Rod can also be used as a temporary joint seal.
  • 1" Diameter
  • Black Color
  • 550' per box

$61.93


Mile High Closed Cell Backer Rod - 1 1/4", 400 ft. per box

 

  • Basic Use: Mile High Closed Cell Backer Rod is an ideal compressible and non-absorbent backup material that is inserted into a joint to control sealant depth. This creates a backstop to facilitate accurate sealant tooling and proper sealant wetting of the joint surfaces, yielding a quality bond breaker between the backup material and the sealant. Mile High Closed Cell Backer Rod can also be used as a temporary joint seal.
  • 1 1/4" Diameter
  • Black Color
  • 400' per box

$74.30


Mile High Closed Cell Backer Rod- 1 1/2", 420 ft. per box (6' sticks)

 

  • Basic Use: Mile High Closed Cell Backer Rod is an ideal compressible and non-absorbent backup material that is inserted into a joint to control sealant depth. This creates a backstop to facilitate accurate sealant tooling and proper sealant wetting of the joint surfaces, yielding a quality bond breaker between the backup material and the sealant. Mile High Closed Cell Backer Rod can also be used as a temporary joint seal.
  • 1-1/2" Diameter
  • Black Color
  • 420' per box

$100.93


Mile High Closed Cell Backer Rod - 2", 228 ft. per box (6' sticks)
  • Basic Use: Mile High Closed Cell Backer Rod is an ideal compressible and non-absorbent backup material that is inserted into a joint to control sealant depth. This creates a backstop to facilitate accurate sealant tooling and proper sealant wetting of the joint surfaces, yielding a quality bond breaker between the backup material and the sealant. Mile High Closed Cell Backer Rod can also be used as a temporary joint seal.
  • 2" Diameter
  • Black Color
  • 252'' per box

$102.46


Mile High Closed Cell Backer Rod - 2 -1/2", 162 ft. per box (6' sticks)

 

  • Basic Use: Mile High Closed Cell Backer Rod is an ideal compressible and non-absorbent backup material that is inserted into a joint to control sealant depth. This creates a backstop to facilitate accurate sealant tooling and proper sealant wetting of the joint surfaces, yielding a quality bond breaker between the backup material and the sealant. Mile High Closed Cell Backer Rod can also be used as a temporary joint seal.
  • 2-1/2" Diameter
  • Black Color
  • 162' per box

$117.79


Mile High Closed Cell Backer Rod - 3" , 102 ft. per box (6' sticks)

 

  • Basic Use: Mile High Closed Cell Backer Rod is an ideal compressible and non-absorbent backup material that is inserted into a joint to control sealant depth. This creates a backstop to facilitate accurate sealant tooling and proper sealant wetting of the joint surfaces, yielding a quality bond breaker between the backup material and the sealant. Mile High Closed Cell Backer Rod can also be used as a temporary joint seal.
  • 3" Diameter
  • Black Color
  • 102' per box

$113.92


Mile High Closed Cell Backer Rod - 4" , 54 ft. per box (6' sticks)

 

  • Basic Use: Mile High Closed Cell Backer Rod is an ideal compressible and non-absorbent backup material that is inserted into a joint to control sealant depth. This creates a backstop to facilitate accurate sealant tooling and proper sealant wetting of the joint surfaces, yielding a quality bond breaker between the backup material and the sealant. Mile High Closed Cell Backer Rod can also be used as a temporary joint seal.
  • 4" Diameter
  • Black Color
  • 54' per box

$114.24


Mile High Closed Cell Backer Rod - Per Foot ( 1/4", 3/8", 1/2", 5/8", 3/4", 1")

 

  • Basic Use: Mile High Closed Cell Backer Rod is an ideal compressible and non-absorbent backup material that is inserted into a joint to control sealant depth. This creates a backstop to facilitate accurate sealant tooling and proper sealant wetting of the joint surfaces, yielding a quality bond breaker between the backup material and the sealant. Mile High Closed Cell Backer Rod can also be used as a temporary joint seal.
  • Black Color
  • 1/4", 3/8", 1/2", 5/8", 3/4", or 1" sold by the foot

$0.25


ITP Tundra Foam Open Cell Backer Rod- 3/8", 750 ft. per bag
  • Basic Use: Tundra Foam is an ideal non-gassing backup material that is inserted into construction and pavement joints to control sealant depth. This creates a backstop to facilitate accurate sealant tooling and configuration. It also permits proper sealant airing, yielding a quality bond breaker between the backup material and the sealant.
  • 3/8" Diameter
  • Black Color
  • 750' per bag

$65.52


ITP Tundra Foam Open Cell Backer Rod - 5/8" , 500 ft. per bag

 

  • Basic Use: Tundra Foam is an ideal non-gassing backup material that is inserted into construction and pavement joints to control sealant depth. This creates a backstop to facilitate accurate sealant tooling and configuration. It also permits proper sealant airing, yielding a quality bond breaker between the backup material and the sealant.
  • 1/4" Diameter
  • Black Color
  • 500' per bag

$47.90


Denver Foam Open Cell Backer Rod - 3/8" , 900 ft. per bag

 

  • Denver Foam® is an open cell polyurethane backer rod serving as a backing for elastomeric and other applied caulking sealants. Denver Foam® controls the amount of sealant required and depth of the installation. Also, it forms the correct hour glass shape of sealant, assuring the contractor and owner the best adhesion and cohesion configuration possible.
  • Specific Uses: For use in expansion/construction joints in concrete and precast concrete walls, floors, partitions, bridge construction, parking decks, curtain walls, glazing, log home construction, highway construction, and pavement maintenance.
  • 3/8" Diameter
  • Yellow Color
  • 900' per bag

$75.26


Denver Foam Open Cell Backer Rod - 5/8" , 500 ft. per bag

 

  • Denver Foam® is an open cell polyurethane backer rod serving as a backing for elastomeric and other applied caulking sealants. Denver Foam® controls the amount of sealant required and depth of the installation. Also, it forms the correct hour glass shape of sealant, assuring the contractor and owner the best adhesion and cohesion configuration possible.
  • Specific Uses: For use in expansion/construction joints in concrete and precast concrete walls, floors, partitions, bridge construction, parking decks, curtain walls, glazing, log home construction, highway construction, and pavement maintenance.
  • 5/8" Diameter
  • Yellow Color
  • 500' per bag

$48.47


Denver Foam Open Cell Backer Rod - 7/8" , 350 ft. per bag

 

  • Denver Foam® is an open cell polyurethane backer rod serving as a backing for elastomeric and other applied caulking sealants. Denver Foam® controls the amount of sealant required and depth of the installation. Also, it forms the correct hour glass shape of sealant, assuring the contractor and owner the best adhesion and cohesion configuration possible.
  • Specific Uses: For use in expansion/construction joints in concrete and precast concrete walls, floors, partitions, bridge construction, parking decks, curtain walls, glazing, log home construction, highway construction, and pavement maintenance.
  • 7/8" Diameter
  • Yellow Color
  • 350' per bag

$55.59


Denver Foam Open Cell Backer Rod - 1-1/8" , 300 ft. per bag

 

  • Denver Foam® is an open cell polyurethane backer rod serving as a backing for elastomeric and other applied caulking sealants. Denver Foam® controls the amount of sealant required and depth of the installation. Also, it forms the correct hour glass shape of sealant, assuring the contractor and owner the best adhesion and cohesion configuration possible.
  • Specific Uses: For use in expansion/construction joints in concrete and precast concrete walls, floors, partitions, bridge construction, parking decks, curtain walls, glazing, log home construction, highway construction, and pavement maintenance.
  • 1-1/8" Diameter
  • Yellow Color
  • 300' per bag

$66.16


Denver Foam Open Cell Backer Rod - 1 1/2", 350 ft. per bag

 

  • Denver Foam® is an open cell polyurethane backer rod serving as a backing for elastomeric and other applied caulking sealants. Denver Foam® controls the amount of sealant required and depth of the installation. Also, it forms the correct hour glass shape of sealant, assuring the contractor and owner the best adhesion and cohesion configuration possible.
  • Specific Uses: For use in expansion/construction joints in concrete and precast concrete walls, floors, partitions, bridge construction, parking decks, curtain walls, glazing, log home construction, highway construction, and pavement maintenance.
  • 1-1/2" Diameter
  • Yellow Color
  • 350' per bag

$138.50


Denver Foam Open Cell Backer Rod - 2" , 200 ft. per bag
  • Denver Foam® is an open cell polyurethane backer rod serving as a backing for elastomeric and other applied caulking sealants. Denver Foam® controls the amount of sealant required and depth of the installation. Also, it forms the correct hour glass shape of sealant, assuring the contractor and owner the best adhesion and cohesion configuration possible.
  • Specific Uses: For use in expansion/construction joints in concrete and precast concrete walls, floors, partitions, bridge construction, parking decks, curtain walls, glazing, log home construction, highway construction, and pavement maintenance.
  • 2" Diameter
  • Yellow Color
  • 200' per bag

$146.70


Norex P3910 Triangular Backer Rod 1/4"x1/4"x1/4" - 1800 Lf Roll

 

1/4" x 1/4"x 1/4" Triangular Backer Rod with one side PSA (Pressure Sensetive Adhresive)

Breaks the bond between verticle and hoirizontal application where a round backer rod will not work, or force into a larger unsightly caulk bead.

Works well in Filet Bead joints. 

Parameter Values are not gauranteed the material and will differ from lot to lot.

$304.67

*Due to weight of backer rod and size of packaging our cart may not correctly figure the shipping charges. You maybe contacted to discuss additional shipping prior to order release.

Sealant Engineering Construction Supply, Inc- 239 James Street Bensenville, Il

(630)860-7878